Cloud Connectivity¶
A ToloMEO device reaches ToloMEO Cloud through the outbound endpoints and ports below.
Ports¶
The ToloMEO Edge agent connects the device to ToloMEO Cloud over MQTTS. A device behind a restrictive firewall must allow egress to the hosts and ports for its environment, plus the OTA endpoints used for firmware downloads. All traffic is outbound (device-initiated) and TLS-encrypted; no inbound ports are opened on the device.
| Port | Protocol | Purpose |
|---|---|---|
8883 |
MQTTS (MQTT over TLS) | The device's runtime connection to ToloMEO Cloud — telemetry and commands |
443 |
HTTPS / TLS | Firmware download from the OTA endpoints; provisioning and the ToloMEO CLI |
Runtime versus provisioning
In normal operation a device connects to ToloMEO Cloud over MQTTS (8883) only. Port 443 on the cloud hosts
below is used during provisioning and by the ToloMEO CLI, not by the
device at runtime; firmware download uses 443 to the OTA endpoints.
IP addresses may change without notice
The IP addresses in the tables below are provided for firewalls that require IP-based rules and may be subject to change without notice. Where possible, allowlist by hostname so a cloud IP change does not disconnect the device.
Development Environment¶
Endpoints for a device connected to the ToloMEO development environment.
| Service | Hostname | IP | Ports |
|---|---|---|---|
WORKERDEV1 |
tolomeo-devel.io*.tolomeo-devel.io |
88.198.119.181 |
443, 8883 |
Production Environment¶
Endpoints for a device connected to the ToloMEO production environment. Allow egress to every master and the worker.
| Service | Hostname | IP | Ports |
|---|---|---|---|
MASTERPROD1 |
tolomeo-prod-master1.tolomeo.io |
91.99.213.3 |
443, 8883 |
MASTERPROD2 |
tolomeo-prod-master2.tolomeo.io |
46.62.218.225 |
443, 8883 |
MASTERPROD3 |
tolomeo-prod-master3.tolomeo.io |
91.98.140.100 |
443, 8883 |
WORKERPROD1 |
tolomeo-prod-pool-iot-worker1.tolomeo.io*.tolomeo.io |
49.13.137.250 |
443, 8883 |
OTA Endpoints¶
Object-storage endpoints the device downloads firmware update artifacts from.
| Service | Hostname | IP | Ports |
|---|---|---|---|
OTA1 |
tolomeo-ota.s3.2scomputers.cubbit.eutolomeo-ota-*.s3.2scomputers.cubbit.eus3.2scomputers.cubbit.eu |
— | 443 |
OTA2 |
tlm-ota-test.s3.eu-central-1.amazonaws.comtlm-ota-*.s3.eu-central-1.amazonaws.coms3.eu-central-1.amazonaws.com |
— | 443 |
Allowlist the OTA endpoints by hostname
The OTA endpoints are object storage (S3), whose IP addresses are assigned dynamically and change over time — hence
the — in the IP column. Allowlist them by hostname (including the wildcard subdomains), not by IP.
See also
- Architecture — which layer ships the ToloMEO Edge agent
- Enable Offline Capabilities — buffer data while disconnected
- Build Your Own BSP Layer — integrate the ToloMEO cloud services